BitFight: Defense Mac OS

BitFight: Defense Mac OS

Bitefight: Defense Mac Os Catalina
Bitefight: Defense Mac Os Download
Mac Os Mojave
Bitefight Defense Mac Os Catalina
Garmin Express, Update Maps and software  Garmin. Easily update maps and software, sync with Garmin Connect™ and register your device. The Defense Travel Management Office 1. Accessing DTS on a Mac Computer.Note: If you continue to have issues after following these instructions, please contact the Travel Assistance Center by submitting a help desk ticket through the Tickets section of Travel Explorer (TraX) or by calling 1-888-Help1Go (888-435-7146). In order to install and operate Endpoint Protection for OS X systems, the computer must meet the following system requirements: Operating systems Endpoint Protection supports the following OS X operating systems: MAC OS X 10.6 Snow Leopard (Intel Core 2 Duo Processor or higher) MAC OS X 10.7 Lion; MAC OS X 10.8 Mountain Lion; Mac OS X 10.9.
To erase a Macintosh hard disk you can boot with a different disk and use the Disk Utility.
The instructions on IASE will direct you to Smartcard Services (middleware) downloads from Mac OS forge. Smartcard Services will work for most CACs and readers, however, if you do not see your CAC keychain in the Keychain Access.app after installing the Smartcard Services package and inserting your CAC in the card reader, then I recommend using. Apr 21, 2021 How to update Microsoft Defender for Endpoint on Mac. Microsoft regularly publishes software updates to improve performance, security, and to deliver new features. To update Microsoft Defender for Endpoint on Mac, a program named Microsoft AutoUpdate (MAU) is used. To learn more, see Deploy updates for Microsoft Defender for Endpoint on Mac.
For OS X 10.2-10.7:Note:This refers to a full Mac OS X 10.2.3 or later CD included with a computer, not to the update-only 10.2.3 CD. Steps for zeroing data:
These steps assume you have a Mac OS X 10.2.3 or later CD:
Insert the Mac OS X CD.
Restart the computer.
Immediately after the startup sound, press and hold the 'C' key to start up from CD.
When the Installer screen appears, do not click Continue. Instead, choose Installer > Open Disk Utilities.
Select the hard drive to erase.
Click the Erase tab.
Select the volume format from the Volume Format pop-up menu.
Click Options.
Select the checkbox for 'Zero all data'.
Click OK.
Click Erase.
For a more secure method of erasing of data, you can select the checkbox '8 Way Random Write Format' instead of or in addition to selecting 'Zero all data.' This process could take several hours.
For OS 10.8 and newer:Secure Erase is documented in the Help menu of the Disk Utility application. Disk Utility has shipped on all OS X versions in /Applications/Utilities folder.

To erase your computer's startup disk, you must start up from another disk, such as an OS X installation disc or from the Recovery Disk. All new OS devices come with a built-in Recovery Disk which can be used by restarting and holding down the R key. A Recovery Disk can also be created on an external hard disk or thumb drive using the Recovery Disk Assistant:
Securely erase a disk in OS X 10.8 or newerThe following is a summary of the Disk Utility help available from the Help menu when running the Disk Utility application:
You can securely erase a disk or partition to make sure the confidential information it contains cannot be recovered.
When erasing a disk or partition, Disk Utility does not erase the actual files; it erases only the information used to access the files. Many commonly available disk recovery apps can easily recover the files. When securely erasing a disk or partition, Disk Utility writes over the erased files, so they can never be recovered. You can choose how many times to write over the files. Writing over the files several times is more secure than writing over them once, but it takes longer.
Securely erasing a disk erases files on all its partitions. Securely erasing a partition erases all the files on that partition but does not affect other partitions.
You can't securely erase a CD, DVD, or a solid-state drive. If you don't want data recovered from a solid-state drive, use full disk encryption.
To erase your computer's startup disk, you must start up from another disk, such as an OS X installation disc or from the Recovery Disk .
Open Disk Utility application from the Utility Folder in the Applications folder or select it from the list when booting from the Recovery Disk.
Select the disk or partition to erase, and then click Erase.
Specify a format, and enter a name for the disk.
Click Security Options, use the slider to choose how many times to write over the data on the disk, and click OK. Writing over the data three times meets the U.S. Department of Energy standard for securely erasing magnetic media. Writing over the data seven times meets the U.S. Department of Defense 5220-22-M standard. Single pass or 'Zeroing out' the date is adequate for most
Click Erase.
Also for those wanting to 'Clean' individual files, note this section from the technote:
Mac OS X 10.3+ feature – Secure Empty TrashYou can securely empty the Trash in Mac OS X Panther. While in the Finder, from the File menu choose Secure Empty Trash.
Note: When you securely empty the Trash, the deleted data cannot be recovered by disk utilities. You should only do this if you have a backup or you are sure you will never need the data again.
For machines which boot only MacOS 9 or less use either Drive Setup, Apple HD SC Setup, or Internal HD Format and select the option to zero out and/or low level format the disk. These programs are usually in the Utilities Folder on the install CDs for the various versions of the MacOS.
-->Applies to:
Want to experience Microsoft Defender for Endpoint? Sign up for a free trial.
Important
On macOS 11 (Big Sur), Microsoft Defender for Endpoint requires additional configuration profiles. If you are an existing customer upgrading from earlier versions of macOS, make sure to deploy the additional configuration profiles listed on this page.
101.27.50 (20.121022.12750.0)Fix to accommodate for Apple certificate expiration for macOS Catalina and earlier. This fix restores Threat & Vulnerability Management (TVM) functionality.
101.25.69 (20.121022.12569.0)Microsoft Defender for Endpoint on macOS is now available in preview for US Government customers. For more information, see Microsoft Defender for Endpoint for US Government customers.
Performance improvements (specifically for the situation when the XCode Simulator app is used) & bug fixes.
101.23.64 (20.121021.12364.0)Added a new option to the command-line tool to view information about the last on-demand scan. To view information about the last on-demand scan, run mdatp health --details antivirus
Performance improvements & bug fixes
101.22.79 (20.121012.12279.0)Performance improvements & bug fixes
101.19.88 (20.121011.11988.0)Performance improvements & bug fixes
101.19.48 (20.120121.11948.0)Note
The old command-line tool syntax has been deprecated with this release. For information on the new syntax, see Resources.
Added a new command-line switch to disable the network extension: mdatp system-extension network-filter disable. This command can be useful to troubleshoot networking issues that could be related to Microsoft Defender for Endpoint on Mac
Performance improvements & bug fixes
101.19.21 (20.120101.11921.0)Bug fixes
101.15.26 (20.120102.11526.0)Improved the reliability of the agent when running on macOS 11 Big Sur
Added a new command-line switch (--ignore-exclusions) to ignore AV exclusions during custom scans (mdatp scan custom)
Performance improvements & bug fixes
101.13.75 (20.120101.11375.0)Removed conditions when Microsoft Defender for Endpoint was triggering a macOS 11 (Big Sur) bug that manifests into a kernel panic
Fixed a memory leak in the Endpoint Security system extension when running on mac 11 (Big Sur)
Bug fixes

To erase your computer's startup disk, you must start up from another disk, such as an OS X installation disc or from the Recovery Disk. All new OS devices come with a built-in Recovery Disk which can be used by restarting and holding down the R key. A Recovery Disk can also be created on an external hard disk or thumb drive using the Recovery Disk Assistant:
Securely erase a disk in OS X 10.8 or newerThe following is a summary of the Disk Utility help available from the Help menu when running the Disk Utility application:
You can securely erase a disk or partition to make sure the confidential information it contains cannot be recovered.
When erasing a disk or partition, Disk Utility does not erase the actual files; it erases only the information used to access the files. Many commonly available disk recovery apps can easily recover the files. When securely erasing a disk or partition, Disk Utility writes over the erased files, so they can never be recovered. You can choose how many times to write over the files. Writing over the files several times is more secure than writing over them once, but it takes longer.
Securely erasing a disk erases files on all its partitions. Securely erasing a partition erases all the files on that partition but does not affect other partitions.
You can't securely erase a CD, DVD, or a solid-state drive. If you don't want data recovered from a solid-state drive, use full disk encryption.
To erase your computer's startup disk, you must start up from another disk, such as an OS X installation disc or from the Recovery Disk .
Open Disk Utility application from the Utility Folder in the Applications folder or select it from the list when booting from the Recovery Disk.
Select the disk or partition to erase, and then click Erase.
Specify a format, and enter a name for the disk.
Click Security Options, use the slider to choose how many times to write over the data on the disk, and click OK. Writing over the data three times meets the U.S. Department of Energy standard for securely erasing magnetic media. Writing over the data seven times meets the U.S. Department of Defense 5220-22-M standard. Single pass or 'Zeroing out' the date is adequate for most
Click Erase.
Also for those wanting to 'Clean' individual files, note this section from the technote:
Mac OS X 10.3+ feature – Secure Empty TrashYou can securely empty the Trash in Mac OS X Panther. While in the Finder, from the File menu choose Secure Empty Trash.
Note: When you securely empty the Trash, the deleted data cannot be recovered by disk utilities. You should only do this if you have a backup or you are sure you will never need the data again.
For machines which boot only MacOS 9 or less use either Drive Setup, Apple HD SC Setup, or Internal HD Format and select the option to zero out and/or low level format the disk. These programs are usually in the Utilities Folder on the install CDs for the various versions of the MacOS.
-->Applies to:
Want to experience Microsoft Defender for Endpoint? Sign up for a free trial.
Important
On macOS 11 (Big Sur), Microsoft Defender for Endpoint requires additional configuration profiles. If you are an existing customer upgrading from earlier versions of macOS, make sure to deploy the additional configuration profiles listed on this page.
101.27.50 (20.121022.12750.0)Fix to accommodate for Apple certificate expiration for macOS Catalina and earlier. This fix restores Threat & Vulnerability Management (TVM) functionality.
101.25.69 (20.121022.12569.0)Microsoft Defender for Endpoint on macOS is now available in preview for US Government customers. For more information, see Microsoft Defender for Endpoint for US Government customers.
Performance improvements (specifically for the situation when the XCode Simulator app is used) & bug fixes.
101.23.64 (20.121021.12364.0)Added a new option to the command-line tool to view information about the last on-demand scan. To view information about the last on-demand scan, run mdatp health --details antivirus
Performance improvements & bug fixes
101.22.79 (20.121012.12279.0)Performance improvements & bug fixes
101.19.88 (20.121011.11988.0)Performance improvements & bug fixes
101.19.48 (20.120121.11948.0)Note
The old command-line tool syntax has been deprecated with this release. For information on the new syntax, see Resources.
Added a new command-line switch to disable the network extension: mdatp system-extension network-filter disable. This command can be useful to troubleshoot networking issues that could be related to Microsoft Defender for Endpoint on Mac
Performance improvements & bug fixes
101.19.21 (20.120101.11921.0)Bug fixes
101.15.26 (20.120102.11526.0)Improved the reliability of the agent when running on macOS 11 Big Sur
Added a new command-line switch (--ignore-exclusions) to ignore AV exclusions during custom scans (mdatp scan custom)
Performance improvements & bug fixes
101.13.75 (20.120101.11375.0)Removed conditions when Microsoft Defender for Endpoint was triggering a macOS 11 (Big Sur) bug that manifests into a kernel panic
Fixed a memory leak in the Endpoint Security system extension when running on mac 11 (Big Sur)
Bug fixes
101.10.72Bug fixes
101.09.61Added a new managed preference for disabling the option to send feedback
Status menu icon now shows a healthy state when the product settings are managed. Previously, the status menu icon was displaying a warning or error state, even though the product settings were managed by the administrator
Performance improvements & bug fixes
101.09.50This product version has been validated on macOS Big Sur 11 beta 9
The new syntax for the mdatp command-line tool is now the default one. For more information on the new syntax, see Resources for Microsoft Defender for Endpoint on macOS
Note
The old command-line tool syntax will be removed from the product on January 1st, 2021.
Extended mdatp diagnostic create with a new parameter (--path [directory]) that allows the diagnostic logs to be saved to a different directory
Performance improvements & bug fixes
101.09.49User interface improvements to differentiate exclusions that are managed by the IT administrator versus exclusions defined by the local user
Improved CPU utilization during on-demand scans
Performance improvements & bug fixes
101.07.23Added new fields to the output of mdatp --health for checking the status of passive mode and the EDR group ID
Note
mdatp --health will be replaced with mdatp health in a future product update.
Fixed a bug where automatic sample submission was not marked as managed in the user interface
Added new settings for controlling the retention of items in the antivirus scan history. You can now specify the number of days to retain items in the scan history and specify the maximum number of items in the scan history
Bug fixes
Bitefight: Defense Mac Os Catalina101.06.63Addressed a performance regression introduced in version 101.05.17. The regression was introduced with the fix to eliminate the kernel panics some customers have observed when accessing SMB shares. We have reverted this code change and are investigating alternative ways to eliminate the kernel panics.
101.05.17Important
In my mind mac os. We are working on a new and enhanced syntax for the mdatp command-line tool. The new syntax is currently the default in the Insider Fast and Insider Slow update channels. We encourage you to famliliarize yourself with this new syntax.
We will continue supporting the old syntax in parallel with the new syntax and will provide more communication around the deprecation plan for the old syntax in the upcoming months.
Addressed a kernel panic that occurred sometimes when accessing SMB file shares
Performance improvements & bug fixes
101.05.16Improvements to quick scan logic to significantly reduce the number of scanned files
Added autocompletion support for the command-line tool
Bug fixes
101.03.12Performance improvements & bug fixes
101.01.54Improvements around compatibility with Time Machine
Accessibility improvements
Performance improvements & bug fixes
101.00.31Improved product onboarding experience for Intune users
Antivirus exclusions now support wildcards
Added the ability to trigger antivirus scans from the macOS contextual menu. You can now right-click a file or a folder in Finder and select Scan with Microsoft Defender for Endpoint
In-place product downgrades are now explicitly disallowed by the installer. If you need to downgrade, first uninstall the existing version and reconfigure your device
Other performance improvements & bug fixes
100.90.27You can now set an update channel for Microsoft Defender for Endpoint on macOS that is different from the system-wide update channel
New product icon
Other user experience improvements
Bug fixes
Bitefight: Defense Mac Os Download100.86.92Improvements around compatibility with Time Machine
Addressed an issue where the product was sometimes not cleaning all files under /Library/Application Support/Microsoft/Defender during uninstallation
Reduced the CPU utilization of the product when Microsoft products are updated through Microsoft AutoUpdate
Other performance improvements & bug fixes
100.86.91Caution
To ensure the most complete protection for your macOS devices and in alignment with Apple stopping delivery of macOS native security updates to OS versions older than [current – 2], MDATP for Mac deployment and updates will no longer be supported on macOS Sierra [10.12]. MDATP for Mac updates and enhancements will be delivered to devices running versions Catalina [10.15], Mojave [10.14], and High Sierra [10.13].
If you already have MDATP for Mac deployed to your Sierra [10.12] devices, please upgrade to the latest macOS version to eliminate risks of losing protection.
Performance improvements & bug fixes
100.83.73Added more controls for IT administrators around management of exclusions, management of threat type settings, and disallowed threat actions
When Full Disk Access is not enabled on the device, a warning is now displayed in the status menu
Performance improvements & bug fixes
100.82.60Addressed an issue where the product fails to start following a definition update.
100.80.42Bug fixes
100.79.42Fixed an issue where Microsoft Defender for Endpoint on Mac was sometimes interfering with Time Machine
Added a new switch to the command-line utility for testing the connectivity with the backend service
Added ability to view the full threat history in the user interface (can be accessed from the Protection history view)
Performance improvements & bug fixes
100.72.15Bug fixes
100.70.99Addressed an issue that impacts the ability of some users to upgrade to macOS Catalina when real-time protection is enabled. This sporadic issue was caused by Microsoft Defender for Endpoint locking files within Catalina upgrade package while scanning them for threats, which led to failures in the upgrade sequence.
100.68.99Mac Os MojaveAdded the ability to configure the antivirus functionality to run in passive mode
Performance improvements & bug fixes
100.65.28Bitefight Defense Mac Os CatalinaAdded support for macOS Catalina
Caution
macOS 10.15 (Catalina) contains new security and privacy enhancements. Beginning with this version, by default, applications are not able to access certain locations on disk (such as Documents, Downloads, Desktop, etc.) without explicit consent. In the absence of this consent, Microsoft Defender for Endpoint is not able to fully protect your device.
The mechanism for granting this consent depends on how you deployed Microsoft Defender for Endpoint:
For manual deployments, see the updated instructions in the Manual deployment topic.
For managed deployments, see the updated instructions in the JAMF-based deployment and Microsoft Intune-based deployment topics.
Performance improvements & bug fixes